OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Drive Gear Assembly for HextrudORT Extruders

OEM Reverse Integrated Drive Gear Assembly

kr119.20

Be aware the primary drive gear is reversed :

not compatible with the Bondtech BMG extruder

We recommend using 4x8x3.0 mm ball bearings (NOW INCLUDED).

Compatible only with :

new HextrudORT extruder

Product Details

Brand

16 other products in the same category:

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

Extruder spare parts

M5 Pneumatic Connector for 1.75mm filament

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

LDO Orbiter 2 Filament Sensor Kit_2944

LDO Orbiter 2 Filament Sensor Kit_2944 2

Extruder spare parts

LDO Orbiter 2 Filament Sensor Kit v2

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

BMG IDGA Retro-fit Set for Bondtech Extruders

BMG IDGA Retro-fit Set for Bondtech Extruders 2

Extruder spare parts

BMG IDGA Retro-fit Set

Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

M10 Pneumatic Connector for 4mm PFTE tube_27

Extruder spare parts

M10 Pneumatic Connector for 4mm PFTE tube

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

4x8x3.0 Ball Bearing for DDX Direct Drive Extruder

Extruder spare parts

Ballbearing 4x8x3.0

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit

Upgrade Your 3D Printing with BMG Drive Gears IDGA Kit 2

Extruder spare parts

BMG Drive Gears IDGA Kit

This set is meant to Bondtech BMG extruder series users, or Open Source community members creating or making their own BMG type extruders. Reduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder. A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.

BMG Internals Set for Sherpa Mini_2984

Extruder spare parts

Bondtech Internals Set for Sherpa Mini

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

Extruder spare parts

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

50-Tooth CNC Hollow POM Gear - Precision & Strength

50-Tooth CNC Hollow POM Gear - Precision & Strength 2

Extruder spare parts

50 Tooth Pom Gear

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

OEM RIDGA V2 Set: Enhanced 3D Print Quality

OEM RIDGA V2 Set: Enhanced 3D Print Quality 2

Out-of-Stock

Extruder spare parts

OEM RIDGA (V2) Set

A very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality. Designed for the following Open Source extruders: HextrudORT Sherpa Mini Voron Mini StealthBurner Why a V2? The OEM RIDGA V2 allows for ideal engagement between main gear and an 8T or 10T motor gear, while retaining a safe...

Bondtech Thumbscrew Assembly_3256

Extruder spare parts

Bondtech Thumbscrew Assembly

Thumbscrew replacement for Bondtech extruder.

PTFE Teflon 3*4mm

New

Extruder spare parts

PTFE Teflon 3*4mm

LGX Steel Drive Train Upgrade for Bondtech Extruders

LGX Steel Drive Train Upgrade for Bondtech Extruders 2

Extruder spare parts

LGX Steel Drive Train Upgrade Set

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

Bambu X1/P1P Extrusion Gear Kit: CNC Nanocoated Upgrade

Extruder spare parts

Improved Bambu X1/P1P CNC Nanocoated Extrusion Gear Kit

Elevate your 3D printing experience with our Improved Nano Coating Extrusion Gear Kit designed for Bambu 3D Printers. This meticulously engineered kit enhances your printer's extrusion system performance. Key Features: Integrated Shaft Design: Ensures superior gear concentricity, reducing eccentric rotation during assembly for even filament transport....

OEM Reverse Set for HextrudORT - Ultimate Feeding System

Extruder spare parts

OEM Reverse Set for HextrudORT

Original Bondtech OEM set of parts to use on the HextrudORT from the HevORT project. Includes a set with the Hardened Steel R.I.D.G.A. V2 and BMG original 1.75mm secondary Drive Gear. Precision cnc-machined. Sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with...

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

Extruder spare parts

Straight Through Pneumatic Connector for 4mm PFTE tube

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy