Extruder

Showing 1-24 of 32 item(s)

Capricorn Bowden PTFE_2570

Capricorn Bowden PTFE_2570 2

Bowden tube - PTFE

Capricorn Bowden PTFE

Original flagship PTFE Tubing from Capricorn 1,9mm inner diameter 4mm outer diameter

PTFE Teflon 2*4mm_352

PTFE Teflon 2*4mm_352 2

Bowden tube - PTFE

PTFE Teflon 2*4mm

PTFE Cutting Knife_83

PTFE Cutting Knife_83 2

Accessory

PTFE Cutting Knife

The PTFE Cutting Knife can be used to freshen up the end of a used PFTE tube, or to cut new tubes without damaging the pfte. When using the knife, you get a straight cut without deforming the PFTE tube.

Bowden Tube Buckle_13

Bowden Tube Buckle_13 2

Connector / Adapter

Bowden Tube Buckle

spare part for pneumatic connectors. With repeated connects of PFTE tubes, the bowden tube buckle may loosen or completely break. So instead of replacing the entire connector, the buckle can be replaced.

M5 Pneumatic Connector for 1.75mm filament_33

M5 Pneumatic Connector for 1.75mm filament_33 2

Connector / Adapter

M5 Pneumatic Connector for 1.75mm filament

M5 PFTE connector with gasket, for PFTE tubes with 4mm outer diameter and 1.75mm filament. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

M6 Pneumatic Connector for 4mm PFTE tube_17

M6 Pneumatic Connector for 4mm PFTE tube_17 2

Connector / Adapter

M6 Pneumatic Connector for 4mm PFTE tube

M6 PFTE brass connector with gasket, for PFTE tubes with 4mm outer diameter. For best results, pfte tubes should be cut straight and pressed to the bottom of the connector.

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube_34 2

Connector / Adapter

M6 Pneumatic Straingh Through Connector for 4mm PFTE tube

M6 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. This model supports the PFTE tube all the way through the connector

M10 Pneumatic Connector for 4mm PFTE tube_27

Connector / Adapter

M10 Pneumatic Connector for 4mm PFTE tube

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector.

Straight Through Pneumatic Connector for 4mm PFTE tube_30

Straight Through Pneumatic Connector for 4mm PFTE tube_30 2

Connector / Adapter

Straight Through Pneumatic Connector for 4mm PFTE tube

M10 Connector for PFTE tube with 4mm outer diameter. The PFTE tube can be passed through the connector. Thread is M10 and typically fits standard Ender 3 extruder as well as some E3D heatbreaks. This model stabilize the tube all the way through the connector.

LGX Lite Large Gears eXtruder + Motor_2060

LGX Lite Large Gears eXtruder + Motor_2060 2

Complete extruder

LGX Lite Large Gears eXtruder + Motor

Micro form factor Featherweight small footprint powerful filament grip. Includes full size LGX® Large Gears, maintenance windows and filament tension with 3 presets (open; rigid; flexible). This extruder only supports 1.75 mm size filament. LGX Lite + LDO-36STH20-1004AHG(XH)

BMG Drivegear kit 1.75 / 5.0_2067

Gear

Bondtech BMG Drivegear kit 1.75 / 5.0

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

BMG Drivegear kit 1.75 / 8.0_2069

Gear

Bondtech BMG Drivegear kit 1.75 / 8.0

Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

BMG Internals Set for Sherpa Mini_2984

Gear

Bondtech Internals Set for Sherpa Mini

Original Bondtech® OEM set of parts to use on the Sherpa Mini from the Annex Engineering group. With BMG® original 1.75/5.0 mm set of Hardened Steel Drive Gears Precision cnc-machined. Super sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments.

OEM Reverse Set for HextrudORT

Gear

OEM Reverse Set for HextrudORT

Original Bondtech OEM set of parts to use on the HextrudORT from the HevORT project. Includes a set with the Hardened Steel R.I.D.G.A. V2 and BMG original 1.75mm secondary Drive Gear. Precision cnc-machined. Sharp teeth for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with...

MR85ZZ Kugleleje - BMG Bearing_774

MR85ZZ Kugleleje - BMG Bearing_774 2

Accessory

MR85ZZ Kugleleje - BMG Bearing

Ball bearing suitable for BMG extruderSize: 5x8x2.5mm

Extruder Spring Extra Hard_1806

Accessory

Extruder Spring Extra Hard

Length 20mmThread diameter 1.2mm

LDO Orbiter 2 Filament Sensor Kit_2944

LDO Orbiter 2 Filament Sensor Kit_2944 2

Accessory

LDO Orbiter 2 Filament Sensor Kit v2

Addon for the Orbiter V2 direct drive extruder. Filament runout detection Filament auto loading Push button activated filament unloading

Bondtech Shaft assembly

Bondtech Shaft assembly 2

Gear

Bondtech Shaft assembly

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

Bondtech Thumbscrew Assembly_3256

Accessory

Bondtech Thumbscrew Assembly

Thumbscrew replacement for Bondtech extruder.

50 Tooth Pom Gear

50 Tooth Pom Gear 2

Gear

50 Tooth Pom Gear

The 50-tooth gear adopts the new CNC hollow POM gear, which has higher strength and precision.

Vz-Hextrudort From VzBoT By Mellow

Vz-Hextrudort From VzBoT By Mellow 2

Product available with different options

Complete extruder

Vz-Hextrudort From VzBoT By Mellow

Delivered without motor The extruder shell is made of 6061 aluminum alloy by cnc machining with high precision, which has not only metal strength but also ultra-light weight.Metal has strength and precision that plastic shells cannot. Metal with thermal conductivity will conduct the heat of the motor, but this is also the process of heat dissipation of...

View

LGX Steel Drive Train Upgrade Set

LGX Steel Drive Train Upgrade Set 2

Accessory

LGX Steel Drive Train Upgrade Set

Push Harder! Full Steel Ahead! Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder : LGX LGX Lite Recommended to feed Engineering grade thermoplastics. To use our LGX extruders above our default recommendations: with thicker mounting plates; at higher environment temperatures; at...

BMG Reverse Integrated Drive Gear Assembly

BMG Reverse Integrated Drive Gear Assembly 2

Gear

BMG Reverse Integrated Drive Gear Assembly

The R.I.D.G.A. replaces the following drive train items: Main shaft Main gear Set screw Primary drive gear Be aware the primary drive gear is reversed : not compatible with the Bondtech BMG extruder We recommend using 4x8x3.0 mm ball bearings (NOT INCLUDED).

Ballbearing 4x8x3.0

Bearings

Ballbearing 4x8x3.0

High precision ball bearing that is used in our DDX Direct Drive eXtruder. Dimensions: 4.0×8.0x3.0

1
2

Filter by

Categories

Accessory 11
Bowden tube - PTFE 3
Complete extruder 5
Connector / Adapter 6
Gear 11

Manufacturers

Extruder

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy