Accessory

Showing 1-24 of 37 item(s)

DimaFix Spray_711

Accessory

DimaFix Spray

With DimaFix spray you get perfect adhesion to the bed every time to avoid warping.Recommended for materials that can be difficult to get to stick/get stuck to bed, e.g. ABS/ASA.Should be used with heated bed and high temperature materials (works best if heat bed is above 70C)The adhesion of DimaFix releases when the bed cools down, making the print...

DimaFix Pen_713

Accessory

DimaFix Pen

With DimaFix pen (without gas) you get perfect adhesion to the bed every time to avoid warping. Recommended for materials that can be difficult to get to stick/get stuck to bed, e.g. ABS/ASA.Should be used with heated bed and high temperature materials (works best if heat bed is above 70C)The adhesion of DimaFix releases when the bed cools down, making...

Filament Splice for 1.75mm Filament_1194

Filament Splice for 1.75mm Filament_1194 2

Accessory

Filament Splice for 1.75mm Filament

Sharp edge spatula_1

Sharp edge spatula_1 2

Accessory

Sharp edge spatula

Print removal spatula. Indispensable for printers where printer bed cannot be removed. The spatula is made of metal and comes with a sharp edge that can more easily get between a fixed print and bed.

Cleaning brush soft brass - for nozzles / hotend_77

Cleaning brush soft brass - for nozzles / hotend_77 2

Accessory

Cleaning brush soft brass - for nozzles / hotend

Cleaning brush for removing dirt and burnt plastic. Can be used for both hot end and nozzle.

PTFE Cutting Knife_83

PTFE Cutting Knife_83 2

Accessory

PTFE Cutting Knife

The PTFE Cutting Knife can be used to freshen up the end of a used PFTE tube, or to cut new tubes without damaging the pfte. When using the knife, you get a straight cut without deforming the PFTE tube.

Cleaning needles for nozzle 10stk 0.35mm_94

Cleaning needles for nozzle 10stk 0.35mm_94 2

Accessory

Cleaning needles for nozzle 10stk 0.35mm

10stk cleaning needles for clogged nozzles. Best suited for 0.4mm nozzles or above. For best results, it is recommended to heat the nozzle before use.

PLATO 170 Red Flush Wire Cutter_810

PLATO 170 Red Flush Wire Cutter_810 2

Accessory

PLATO 170 Red Flush Wire Cutter

Kapton high temperature tape - 33Meter_789

Kapton high temperature tape - 33Meter_789 2

Accessory

Kapton high temperature tape - 33Meter

LDO Heat Insert tool M3_1215

Accessory

LDO Heat Insert tool M3

Tool for inserting heat-set inserts in M3 size. Install on a compatible soldering iron.

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)_1762 2

Accessory

7ml Super Lube® Multi-Use Synthetic Oil with Syncolon® (PTFE)

Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an...

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_1764

Accessory

12g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

Silica Gel 1Kg - Loose beads with indicator_1737

Silica Gel 1Kg - Loose beads with indicator_1737 2

Storage

Silica Gel 1Kg - Loose beads with indicator

1Kg silica/silicate gel. The silica gel absorbs the moisture and binds it to it. When the silica gel cannot hold more moisture, the silica gel changes color from orange to green. The grains can be recycled. Simply dehumidify the grains by wiping them in a conventional oven at a maximum of 100 degrees Celsius. The grains are dehumidified when the grains...

Vacuum bags 30x40cm 50Stk._1796

Storage

Vacuum bags 30x40cm 50Stk.

Vacuum bags in 30x40cm, suitable for 1Kgs filament coils. Used with regular "Food vacuum packer"

Torque key for nozzle changes_1805

Torque key for nozzle changes_1805 2

Accessory

Torque key for nozzle changes

Provides correct torque during nozzle change. Included 7mm & 8mm sockets fits V6/MK8.

Plastic Repellent Paint™_2071

Plastic Repellent Paint™_2071 2

Accessory

Slice Engineering Plastic Repellent Paint™

Prevents plastic adhesion to your nozzles and heat block Water-based PTFE nanosuspension Repels plastic from the outside of your nozzle and heat block Applies quickly and uniformly with the vial's brush top Bonds with clean metal surfaces upon first heating to form a dry, transparent coating Endures printing temperatures up to 290°C Each vial contains...

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)_2766

Accessory

85g Super Lube® Multi-Purpose Synthetic Grease with Syncolon® (PTFE)

Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to...

Heat Insert M3/M4/M5_2053

Heat Insert M3/M4/M5_2053 2

Accessory

Heat Insert M3/M4/M5

Brass Heat insert

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)_3069

Accessory

118.29ml Super Lube® Super Clean (NSF A1 Cleaner)

Cleaner/degreaser - Food safe - NSF A1 Super Lube® Super Kleen Cleaner/Degreaser is a specially formulated, industrial strength, multi-purpose non-solvent solution designed for cleaning dirt, grease, grime and ink on virtually any water safe surface. Super Lube® Super Kleen Cleaner/Degreaser works effortlessly. Use full strength or dilute as required....

Filament cleaner for 1.75mm filament (round)_2616

Filament cleaner for 1.75mm filament (round)_2616 2

Accessory

Filament cleaner for 1.75mm filament (round)

Filament cleaner for 1.75mm filament (round)

High Temperature Silicone Sealant - Black 80g

Accessory

High Temperature Silicone Sealant - Black 80g

High-temperature resistant sealant, resistant to high (+380°C) and low temperatures (-65°C). Elastic, fast curing sealant that forms lasting, not shrinking and UV-resistant fi lling compound. Seals and glues most surfaces such as glass, ceramics, aluminum and metal perfectly. curing time: 3 mm/24 h tooling time: 10-20 min operating temperature from -60°C...

Threadlocker low strength 10ml

Accessory

Threadlocker low strength 10ml

Threadlocker / adhesive for securing metal threaded connections with low strength bonding. Binding in contact with metal surfaces in the absence of air. low strength initial binding up to 15 minutes full strength: steel – after 6 hours, stainless steel – after 24 hours, brass – after 1 hour temperature resistance from -55°C to +150°C

Threadlocker high strength 50ml (for fixed installation)

Accessory

Threadlocker high strength 50ml (for fixed installation)

Threadlocker / adhesive for securing metal thread joints with very high binding strength. It binds when in contact with metal surfaces and in isolation from oxygen. high binding strength protection against corrosion resistance to vibration safeguarding against thread leakages resistance to high temperatures initial binding of up to 15 minutes full...

Super Glue - ultra strong 20g

Accessory

Super Glue - ultra strong 20g

One-component, fast curing cyanoacrylate adhesive with low viscosity for plastic and rubber. Works with all types of plastic PLA PETG ASA ABS TPU

1
2

Filter by

Manufacturers

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy