Nozzle

Showing 1-24 of 31 item(s)

Nozzle

Phaetus PS M6 Brass Nozzle 1,75 mm

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! Highlights High Temperature Performance Low Pushing Force Faster...

Nozzle

Phaetus PS M6 Copper Nozzle 1,75 mm

Phaetus

4592

kr78.40

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm_2782

Product available with different options

Nozzle

Phaetus PS M6 Hardened Steel Nozzle 1,75 mm

Phaetus

4593

kr84.00

Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole Inner hole roughness...

View

Nozzle

Phaetus PS V2 M6 hardened steel nozzle (DLC coating)

Phaetus

4595

kr183.20

In 3D printing filaments, composite consumables containing abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments are often very hard.The use of ordinary nozzle printing, will soon wear holes and inner diameter, destroying the original performance of the nozzle. And Mohs type hardness of the hardened...

Nozzle

Phaetus M6 / V6 Tungsten Carbide Nozzle

Phaetus

4583

kr287.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Remote storage 2-3 days

Nozzle

Phaetus MK8 Tungsten Carbide Nozzle

Phaetus

4584

kr287.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Nozzle

Phaetus PH Volcano Brass Nozzle 1,75 mm

Phaetus

4598

kr71.20

Nozzle

Phaetus PH Volcano Copper Nozzle 1,75 mm

Phaetus

4597

kr119.20

Nozzle

Phaetus PH Volcano Hardened Steel Nozzle 1,75 mm

Phaetus

4594

kr140.00

Nozzle

Phaetus PH Volcano hardened steel nozzle (DLC coating)

Phaetus

4596

kr207.20

Nozzle

Phaetus Volcano Compatible Tungsten Carbide Nozzle

Phaetus

4585

kr287.20

The premium nozzles from Phaetusare a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From...

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Nozzle

Bondtech CHT® MK8 Coated Brass Nozzle

Bondtech

4428

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires an 8mm wrench

Accessory

Slice Engineering Plastic Repellent Paint™

6489

kr112.00

Prevents plastic adhesion to your nozzles and heat block Water-based PTFE nanosuspension Repels plastic from the outside of your nozzle and heat block Applies quickly and uniformly with the vial's brush top Bonds with clean metal surfaces upon first heating to form a dry, transparent coating Endures printing temperatures up to 290°C Each vial contains...

Accessory

Torque key for nozzle changes

6430

kr156.00

Provides correct torque during nozzle change. Included 7mm & 8mm sockets fits V6/MK8.

Cleaning brush soft brass - for nozzles / hotend_77

Accessory

Cleaning brush soft brass - for nozzles / hotend

637

kr15.20

Cleaning brush for removing dirt and burnt plastic. Can be used for both hot end and nozzle.

Cleaning needles for nozzle 10stk 0.35mm_94

Accessory

Cleaning needles for nozzle 10stk 0.35mm

644

kr20.00

10stk cleaning needles for clogged nozzles. Best suited for 0.4mm nozzles or above. For best results, it is recommended to heat the nozzle before use.

Nozzle

Bondtech Volcano CHT® Coated Brass Nozzle

Bondtech

4622

kr188.00

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Main Bondtech CHT® Vol Advantages Higher melt capacity by increasing the surface area of the heating walls Flow Rate gains close to 50% Competitive price/performance price...

Remote warehouse 2-3 days

Nozzle

E3D RapidChange Revo™ Brass Nozzle

E3D

4661

kr175.20

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten...

Nozzle

E3D RapidChange Revo™ ObXidian Nozzle

E3D

4662

kr335.20

Our most advanced nozzle yet. Revo ObXidian is our latest abrasive Revo Nozzle offering, specifically designed for printing fibre-filled polymers. Unlike other abrasion resistant Nozzles, ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the same slicer profiles as for your...

V6 Pro Adapter To Increase Super Flow Of V6 / RapidoHot End_3220

Spare parts

V6 Pro Adapter To Increase Super Flow Of V6 / RapidoHot End

15672

kr52.00

This adapter block is made of copper alloy to maintain high thermal conductivity and thermal stability, and the surface is nickel-plated to reduce filament residue. It is used for V6 hot end or Rapido hot end to lengthen the fusing zone for high flow printing design. Support cht nozzle installation. The pro version is designed to provide a longer heated...

Bondtech CHT BiMetal RepRap Coated Nozzle

Front page

Bondtech CHT BiMetal RepRap Coated Nozzle

Bondtech

2725

kr296.00

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50% They are manufactured by Bondtech in-house.

Nozzle

Bondtech CHT BiMetal Vol Coated Nozzle

Bondtech

4727

kr335.20

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. Increase the Max Volumetric Flow of your Volcano style heat block by 50% They are manufactured by Bondtech in-house,

Nozzle

RTv6 V2 - Revo to V6 adapter

kr287.20

A Revo nozzle adapter to make any V6 nozzle a quick change nozzle. Rvo CHT? Rvo Diamond? Rvo Emerald? All possible now. Lead free threaded top. Titanium tube. Copper bottom with V6 threads. Custom silicone sock rated for 500c. Note using the RTv6 will make your hotend longer compared to Revo nozzles, therefore you may need a new fan shroud. Single pack:...

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy