3DO Nozzle Camera Kit - Sony 4K
After seeing a lot of cool nozzle camera videos with hacked-up endoscopes...
We decided to make a real "Nozzle Camera" for 3D printers.
Demo video:
https://www.youtube.com/watch?v=BjG8rhLlGIU
Kit includes
- 1x Nozzle Camera 4K 30FPS@4K 60FPS@1080P
- 4x 2*10mm SHCS screws (for PCB mounting)
- 4x 5050 SK6812 WWCW 6000K LED
- 1x High-quality high-temperature USB cable (FEP + Silicone) - 70cm
- 2x 5P 1.0 connectors
- 10x pins for the connector
Print files:
|
4K (Sony IMX258)
|
Sensor Size |
1/3.06 |
Mega-Pixel |
13MP |
Frame Rate |
30FPS@4K 60FPS@1080P |
Lens type* |
Fixed Focus |
FoV |
80Deg |
Operating temperature** |
-20°C TO 60°C |
Storage temperature |
-40°C TO 80°C |
*Focus distance from the back side of the camera to the object is set to 34.5mm
(it’s possible to change the focus distance by rotating the lens. Note the lens is glued in place, so new glue needs to be applied after adjusting)
**Though this is the camera rating we tested it in a 70C heat chamber for 24hrs without any issues.
FPC (Ribbon between sensor and PCB) is rated at 225C. In the 120C heat chamber, the lens housing started to deform (we may change the housing material for the next version)
Contributors that made this project possible, a big thanks to you all!
CAD Design & Testing
- Olof Ogland (Known from Bondtech)
- Kenneth Munkholt (VZ Community)
- Dennis Jespersen (From RatRig Community)
Software Development & Testing
- Meteyou (Mainsail founder)
- KwadFan (Crowsnest founder)
- Rogerlz(Crowsnest Tester)
Beta Testers
- Mitsuma (From RatRig Community)
- Joao Barros (From RatRig Community)