Heater 20mm 50w heater - 1m 17112 kr46.40 Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas.Powerful Output: Despite its compact size,... Add to basket
Heater 20mm 70w heater - 1m 17113 kr63.20 Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:... Add to basket
Thermistor ATC Semitec 104GT-2 Thermistor - 1 Meter 18116 kr30.40 Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and... Add to basket
Probes BD Sensor Kit kr236.00 BD Sensor is a super fast new inductive bed leveling probe with 0.01mm resolution. It works slightly different than normal bed probes because it can measure & compensate for differences in realtime however you can still run it as a normal bedmesh if preferred. more info here: https://github.com/markniu/Bed_Distance_sensor Add to basket
Nozzle Bondtech CHT Spider Coated Brass Nozzle Bondtech kr119.20 Optimized for 1.75mm filament. Compatible with 2.85mm filament. The Bondtech CHT CSP nozzles are compatible with the following hotends Creality Spider hotend (V1) The Creality Spider hotend may be used on the following Craslity 3D printer models: Ender-3 / Ender-3 Max / Ender-3 Pro / Ender-3 V2 Ender-5 / Ender-5 Plus / Ender-5 Pro Ender-6... Add to basket
-50% Silicon socks CR10/MK8 Silicone Sock - 10 Pcs. 1490 kr80.00 kr160.00 Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature. Add to basket
Heater Ceramic Heater P1P/X1C kr23.20 Introducing the Ceramic Heater P1P/X1C, a high-quality 24V 48W Heater Sheet designed to provide a powerful warmth in all conditions. Pre-crimped with a JST-XH connector, this heater is easy to install and use, making it a perfect choice for those chilly days.For secure operation, it requires a metal retainer clip to keep it in place, ensuring a steady and... Add to basket
Hotend spare parts Dragon Ceramic Aerospace Heatbreak V2 15668 kr247.00 This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,... Add to basket
Hotend spare parts Dragon HF HeatBreak 1575 kr160.00 Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends. Add to basket
Silicon socks Dragon ST/HF Silicone Sock Phaetus 1483 kr31.20 Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature Add to basket
Hotend spare parts Dragon ST HeatBreak 1574 kr160.00 Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends. Add to basket
Hotend spare parts Dragonfly BMO Heatsink 1581 kr151.20 Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter. Add to basket
Hotend spare parts Dragonfly BMS/BMO Heatbreak 1578 kr160.00 Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends. Add to basket
Silicon socks Dragonfly BMS/BMO Silicone Sock Phaetus 1484 kr31.20 Our "Silicone Socks" are made of a heat-resistant "non-stick" silicone material, this helps keep your heatblock clean.A silicone sock also helps insulate your heatblock, providing a more stable temperature Add to basket
Hotend spare parts Dragonfly BMS Heatsink 1582 kr160.00 Dragonfly BMS heatsink with conical heatbreak. Mounting holes fit Ends 2/3/5 and CR-10/20. Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ CR E3D 10664 kr628.00 Upgrade your 3D printing game with the E3D RapidChange Revo™ CR. This versatile and high-performing drop-in upgrade is perfectly compatible with popular Creality 3D printers, including the Creality CR-10 and Ender 3 series. Effortless Installation: Designed for easy setup, the Revo CR takes the hassle out of upgrading your 3D printer.Enhanced Performance:... Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ Hemera E3D 10660 kr1,136.00 Introducing the E3D RapidChange Revo™ Hemera, a revolution in 3D printing technology. This ultra-lightweight, compact HotEnd, weighing a mere 30g, delivers exceptional speed performance. Whether you're using Bowden or direct drive setups, the Revo Micro fits seamlessly into your workflow. Changing nozzles is a breeze, with no need for tools or hot... Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ Micro E3D 10663 kr628.00 Experience the next level of 3D printing with the E3D RapidChange Revo™ Micro. This ultra-lightweight HotEnd, weighing just 30g, is our smallest and lightest yet, designed to maximize your printer's speed performance. Crafted for both Bowden and direct drive setups, the Revo™ Micro is a revolution in convenience, allowing you to change nozzles... Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ Prusa MK3 Edition E3D 10659 kr628.00 Introducing the E3D RapidChange Revo™ Prusa MK3 Edition - a revolution in 3D printing. This ultra-lightweight HotEnd, weighing just 30g, is the smallest and lightest we've ever created. It's designed to deliver superior speed performance, whether you're using Bowden or direct drive setups. Designed specifically for use with Revo NozzlesWorks seamlessly... Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ Six E3D 10657 kr607.20 Upgrade your 3D printer with the E3D RapidChange Revo™ Six, a perfect drop-in replacement for your E3D V6 HotEnd. This easy-to-install component integrates seamlessly with Prusa MK2/3 printers (always check voltage before ordering).Enjoy the convenience of identical dimensions to the E3D V6 HotEnd, ensuring a hassle-free upgrade.No need for any machine... Add to basket
Remote warehouse 2-3 days Complete hotends E3D RapidChange Revo™ Voron E3D 10655 kr946.20 Introducing the E3D RapidChange Revo™ Voron - the ultimate HotEnd for your Voron 3D printer. It's smaller, lighter, and redder than ever before, making it an essential upgrade for your 3D printing needs.This innovative product was designed in partnership with Team Voron, ensuring perfect compatibility and optimal performance. Its standout feature is the... Add to basket
-15% Complete hotends Goliath Hotend (AKA LSD) From VzBoT By Mellow 10744 kr917.32 kr1,079.20 Introducing the Goliath Hotend (AKA LSD) by VzBoT from Mellow, the ultimate tool for 3D printing enthusiasts. This innovative hotend boasts a choice of air-cooled or water-cooled aluminum heatsink for optimal performance. Its unique bi-material copper and zirconia heatbreak ensures efficient heat transfer. With ceramic spacers and a nickle-plated copper... Add to basket
Complete hotends High Flow ObXidian™ HotEnd Upgrade for Bambu Lab X1/P1 Series Printers kr532.00 Transform your 3D printing with the E3D & Bambu Lab ObXidian High Flow HotEnd Kit, engineered for the Bambu Lab X1, X1 Carbon, X1E, P1S, and P1P printers. This cutting-edge upgrade boosts your printer's performance by 60%, delivering unparalleled speed and precision with a seamless installation. Compatibility: Perfect for 1.75 mm filament across... Add to basket
Thermistor PT100 Thermocouple 18355 kr103.20 Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and... Add to basket
Thermistor PT1000 Thermocouple 18539 kr119.20 Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced... Add to basket
New Frame accessories Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends BIQU kr199.20 Panda Jet Omni-Directional Cooling Fan Duct for Bambu Lab Hotends - Upgrade your 3D printing with the Panda Jet, a cutting-edge cooling fan duct made from high-quality MJF nylon. Designed for the Bambu Lab P1/X1 series and compatible with Panda Flow and Revo series hot ends, this duct features an innovative air path that precisely directs cooling air to... Add to basket
Complete hotends Phaetus Dragon Phaetus 1039 kr521.20 Experience the power of the Phaetus Dragon Hotend, designed to withstand high temperatures up to 500°, while keeping the heatbreak and incoming filament cool. This versatile hotend's innovative design allows for easy nozzle replacement without touching the heat block. It's the perfect fit for most machines that utilize E3D hotends and heatbreaks.... Add to basket
Complete hotends Phaetus Dragon Voron Phaetus 1067 kr591.20 Experience the power of the Phaetus Dragon Voron, a high-temperature hotend authorized by the Voron Team. Designed to fit seamlessly onto their printhead, this model is capable of handling temperatures up to 500° without any heat creep, thanks to its specially designed heatbreak. Two Heatbreak Options: Choose between the standard flow (SF) and high flow... Add to basket
Complete hotends Phaetus Dragonfly BMO Phaetus 1042 kr359.20 Upgrade your 3D printing capabilities with the Phaetus Dragonfly BMO, a superior alternative to the standard V6 hotend. This model supports temperatures up to 500°, enabling you to work with a wider range of materials. With its consistent flow rate and improved heatbreak precision, you'll enjoy smoother prints with fewer imperfections. High Temperature... Add to basket
Product available with different options Complete hotends Phaetus Dragonfly BMS Phaetus 1041 kr320.00 Upgrade your Ender or CR series printer with the Phaetus Dragonfly BMS for a superior printing experience. This model supports temperatures up to 500°C, significantly higher than standard hotends. Key benefits include:Increased Flowrate: The Dragonfly BMS delivers a faster flowrate, enhancing your printer's efficiency.Improved Precision: Benefit from... View
Silicon socks Rapido HF Silicone Sock Phaetus 14582 kr39.20 Protects and insulates your Rapido heating block and nozzle! Add to basket
Hotend spare parts Rapido Plus HF&UHF Heating Block Kit 350° (PT1000) Phaetus 10616 kr359.20 Assembled with Heater and Thermistor Add to basket
Silicon socks Rapido UHF Silicone Sock Phaetus 14635 kr39.20 Protects and insulates your Rapido heating block and nozzle! Add to basket