Dragon ST HeatBreak

kr160.00

Dragon Standard Flow heatbreak for Dragon heatsink. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

Product Details

Reference 1574

16 other products in the same category:

Hotend spare parts

Dragonfly BMO Heatsink

1581

kr151.20

Dragonfly BMO heatsink for dragonfly conical heatbreaks. Heatsink is exclusive V6 adapter.

Hotend spare parts

Dragon Heat Block

1576

kr140.00

Hotend spare parts

Dragonfly BMS/BMO Heatbreak

1578

kr160.00

Conical heatbreak for Dragonfly BMS/BMO heatsink. Thread for hotend is M6 and fits blah. standard V6 hotend and Dragonfly hotends.

Hotend spare parts

Dragonfly BMS/BMO Heatblock

1577

kr176.00

Thermistor

PT1000 Thermocouple

18539

kr119.20

Experience precision like never before with our PT1000 Thermocouple. With a superior temperature measurement range reaching up to 450 degrees Celsius, this sensor offers greater accuracy than standard NTC sensors. There's no need for a 31865 chip conversion signal; the PT1000 can directly replace your existing NTC sensor for enhanced...

ATC Semitec 104GT-2 Thermistor - 1 Meter_342

Out-of-Stock

Thermistor

ATC Semitec 104GT-2 Thermistor - 1 Meter

18116

kr30.40

Experience the precision of the ATC Semitec 104GT-2 Thermostat - 1 Meter. This top-quality thermostat is designed to deliver accurate temperature control, ensuring optimal performance in your heating and cooling systems. Accurate Temperature Sensing: This device provides precise temperature readings, ensuring energy efficiency and comfort.Compact and...

View

Heater

20mm 70w heater - 1m

17113

kr63.20

Experience the efficiency of our 20mm 70w heater - 1m! This powerful, compact heating solution is designed to deliver high-performance heating in a compact size. Perfect for a wide range of applications, it is built to last with robust materials and advanced technology. High Power: With a 70w output, it delivers strong, consistent heat.Compact Size:...

Rapido Plus HF&UHF Heating Block Kit 350°_2929

Hotend spare parts

Rapido Plus HF&UHF Heating Block Kit 350° (PT1000)

Phaetus

10616

kr359.20

Assembled with Heater and Thermistor

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle

LDO Revo HF HotSide Kit: 60W Heater, 0.6mm Nozzle 2

Out-of-Stock

Hotend spare parts

LDO Revo™ HF Hot side Kit - 60w HeaterCore with 0.6 Nozzle

LDO

10655

kr599.20

The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd. Includes a 60W heater core and 0.6mm high flow Revo nozzle.

View

Thermistor

NTC 3950 Thermistor P1P/X1C

kr15.20

Introducing the NTC 3950 Thermistor P1P/X1C - a top-tier 100K Ohm Glassbead Thermistor designed for precision and durability. This robust device is pre-crimped with GH1.25, ensuring easy installation and secure connections.With its ability to handle temperatures up to 300 Celsius, it's perfect for high-temperature applications.Experience unparalleled...

Heater

20mm 50w heater - 1m

17112

kr46.40

Experience superior warmth with our 20mm 50w heater - 1m! This high-performance heater ensures consistent, reliable heating, making it an essential addition to your home or office. Compact Design: With a diameter of just 20mm, it fits seamlessly into any space, making it perfect for both small and large areas.Powerful Output: Despite its compact size,...

Thermistor

PT100 Thermocouple

18355

kr103.20

Introducing the versatile PT100 Thermocouple, your reliable solution for accurate temperature measurement. This robust thermocouple, also known as PT100 termokobler, is designed with a 3mm diameter and 15mm length, ensuring a compact and efficient design.With a generous cable length of 1300mm, this thermocouple offers flexibility in setup and...

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber

Dragon Ceramic Aerospace Heatbreak V2 for Carbon Fiber 2

Product available with different options

Hotend spare parts

Dragon Ceramic Aerospace Heatbreak V2

15668

kr247.00

This Dragon Ceramic Aerospace Heatbreak is used for crazy hot-end printing carbon fiber, because ordinary Dragon heatbreak uses 0.1mm thin-walled tube, although the performance is perfect. But when printing carbon fiber for a long time, the carbon fiber will cause the heatbreak to break, so it will be a very troublesome thing for the hot end. Therefore,...

View

VZ Goliath M3 PT1000 Thermistor Set - Precision Hotend Upgrade

Out-of-Stock

Hotend spare parts

Thermistor set for VZ Goliath hotend M3 PT1000

kr87.20

View

Revo Bimetal Heatbreak V6 - Ultimate Nozzle Swappability

Out-of-Stock

Hotend spare parts

Revo Bimetal Heatbreak V6

kr191.20

Bimetal Revo heatbreak made out of Copper and Tc4 (Titanium) designed with the unique ability to allow for swappable v6 nozzles.

View

Hotend spare parts

Rapido 2.0 Heater Clips

kr40.00

Customers who bought this product also bought:

Voron StealthBurner LED Kit - Enhance Your 3D Printing

Voron StealthBurner LED Kit - Enhance Your 3D Printing 2

LEDs

Voron StealthBurner Fully Assembled LED Kit By Fysetc

20620

kr71.20

Illuminate your 3D printing experience with the Voron StealthBurner Fully Assembled LED Kit by Fysetc. Designed to enhance visibility and precision, this kit is a must-have for every 3D printing enthusiast.Easy Installation: Arriving fully assembled, this kit is user-friendly, saving you time and effort.Superior Brightness: Equipped with high-quality...

Extruder spare parts

PTFE Teflon 3*4mm

1692

kr40.00

Bondtech Shaft Assembly for BMG & Direct Extruders

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

Hotend spare parts

Dragon HF HeatBreak

1575

kr160.00

Dragon High Flow heatbreak for Dragon heatsink. The HF model is comes with ceramic insulation which ensures less heat loss as well as longer melting zone. Hotend thread is M6 and fits dragon hotends as well as standard V6 hotends.

Tools

PTFE Cutting Knife

638

kr13.60

Gør dit arbejde nemmere og mere præcist med vores PTFE Skærekniv. Denne kniv er designet til at opfriske enden på et brugt PTFE rør, eller til at skære nye rør over uden at skade materialet. Med vores skærekniv får du altid et lige snit, og du undgår at deformere PTFE røret. Præcision: Få altid et lige snit uden at deformere PTFE røret.Økonomisk: Genbrug...

Unlock 3D Printing Potential with Klipper Expander Board

Helper Boards

Klipper expander board

kr143.20

Unleash the full potential of your 3D printer with the Klipper Expander Board. Designed specifically for use with Klipper 3D Printer firmware, this simple MCU board is packed with powerful features. The STM32F042F6P6 MCU with an internal oscillator ensures precise control, while the SWD (Serial Wire Debug) header allows for easy debugging. 4 3A Mosfet...

Hotend spare parts

Dragon Heat Block

1576

kr140.00

Cleaning needles for nozzle 10stk 0.35mm_94

Tools

Cleaning needles for nozzle 10stk 0.35mm

644

kr20.00

Introducing our Rensenåle til dyse 10stk 0.35mm - the ultimate solution for clogged nozzles! These cleaning needles are designed to work best with 0.4mm nozzles or larger, ensuring your equipment runs smoothly and efficiently. For optimal results, we recommend heating the nozzle before use. This facilitates easy and effective cleaning, prolonging the...

Customers who bought this product also bought:

Tools

PTFE Cutting Knife

638

kr13.60

Hotend spare parts

Dragon HF HeatBreak

1575

kr160.00

Complete hotends

Phaetus Dragon

Phaetus

1039

kr521.20

Experience the power of the Phaetus Dragon Hotend, designed to withstand high temperatures up to 500°, while keeping the heatbreak and incoming filament cool. This versatile hotend's innovative design allows for easy nozzle replacement without touching the heat block. It's the perfect fit for most machines that utilize E3D hotends and heatbreaks....

Nozzle

Bondtech CHT® Coated Brass Nozzle

Bondtech

4429

kr148.00

1 unit per pack; Available sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench

Product available with different options

Tools

Torque key for nozzle changes

6430

kr156.00

Forbedre din dyseskift med vores Momentnøgle! Denne nøgle er designet til at forhindre overstramning, hvilket sikrer en optimal og sikker brug hver gang. Undgå overstramning af din dyse med denne momentnøgle. Den er designet til at stoppe, når den rette stramning er opnået, hvilket sikrer, at du aldrig overstrammer.Medfølger 7mm & 8mm socket, der...

View

Hotend spare parts

Dragon Heat Block

1576

kr140.00

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM_980 2

Out-of-Stock

Fans

GDSTIME 2510 24v Axial Fan - 27.46dBA 12000RPM

34188

kr55.20

Meet the GDSTIME 2510 24v Axial Fan - a high-performance cooling solution with a noise level of just 27.46dBA. Despite its compact size of 25x25x10mm, this fan boasts a whopping 12000RPM, ensuring optimal ventilation for your devices. Ball Bearing: Ensures smooth, frictionless operation.High RPM: With a speed of 12000RPM, it delivers superior cooling...

View

Adhesive insulation - thickness 10mm_1435

Adhesive insulation - thickness 10mm_1435 2

Product available with different options

Spare parts for print bed

Adhesive insulation - thickness 10mm

33364

kr39.20

Adhesive multi-size cotton insulation, 10 mm thick

View

Extruder spare parts

Bondtech Shaft assembly

Bondtech

41686

kr31.20

Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

100 Ohm LED Resistor PCB for Improved LED Performance

100 Ohm LED Resistor PCB for Improved LED Performance 2

Helper Boards

LED Resistor PCB - 100 Ohm - Complete

kr24.80

Introducing the LED Resistor PCB - 100 Ohm - Complete from Linneo, a compact yet powerful solution for your LED installation needs. This easy-to-use PCB ensures your LED or Neopixel outputs function correctly, preventing erratic behavior in your addressable LED chains.Easy Installation: Designed for simplicity, this PCB provides a straightforward path to...