3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

3DO Enclosure & Nozzle Camera V2 Kit

In stock

kr0.00

Build your perfect 3D printer camera setup with the 3DO Enclosure & Nozzle Camera V2 Kit.
Choose from a variety of camera sensors, FPC cable lengths, and optional LED support to create a customized solution tailored to your needs.

Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

Configure your desired kit below

Camera configuration

	The heart of the 3DO Enclosure / Nozzle Camera V2 system. This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2	3DO Enclosure / Nozzle Camera V2 DSP PCB kr183.20
	Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range) Equipped with the IMX258 sensor, featuring 13 megapixels, Exmor RS technology and excellent low-light performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2	3DO Enclosure / Nozzle Camera V2 Sensor kr156.00
	FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2	3DO Enclosure / Nozzle Camera V2 FPC Cable kr76.00
	Generic USB A to 5P JST SH for 3DO Nozzle Camera DSP PCB.	Generic USB Cable for Nozzle Camera (USB A to 5P) - 2 Meters kr52.00
	High-quality USB cable for 3DO Nozzle Camera FEP Jacket with a silicone outer jacket 1 Data pair AWG28, 2 stranded power wires 28AWG Rated temeprature 200C Dynamic bending radius 24mm Static bending radius 16mm Includes 2x 5P 1.0 connectors 10x pins for connector	3DO High Temperature USB Cable for Nozzle Camera (USB A to 5P) FEP+Silicone kr72.00

Product Details

Brand

7 other products in the same category:

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

3DO High Temperature USB Cable for Nozzle Camera (USB A to 5P) FEP+Silicone

High-quality USB cable for 3DO Nozzle Camera FEP Jacket with a silicone outer jacket 1 Data pair AWG28, 2 stranded power wires 28AWG Rated temeprature 200C Dynamic bending radius 24mm Static bending radius 16mm Includes 2x 5P 1.0 connectors 10x pins for connector

3DO Enclosure / Nozzle Camera V2 Sensor

3DO Enclosure / Nozzle Camera V2 Sensor 2

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 Sensor

Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range)...

3DO Enclosure / Nozzle Camera V2 FPC Cable

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 FPC Cable

FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

Generic USB Cable for Nozzle Camera (USB A to 5P) - 2 Meters

Generic USB A to 5P JST SH for 3DO Nozzle Camera DSP PCB.

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

3DO 5050 WWCW SK6812 LED Pack - Bright, Compact Lighting

In stock

Cameras

3DO 5050 WWCW SK6812 LED (10Pcs.)

We made this tiny 5050 (5mm x 5mm) WWCW LED, doing our nozzle camera project, as we wanted as much light as possible, while still keeping the SK6812 protocol. Single LED: 5mm x 5mm / 0.2" x 0.2" We don't have any more specifics about this particular LED other than it is 6000-6500K color temp and has 3 white LEDs in place of the regular Red/Green/Blue...

3DO 5050 RGBW SK6812 LED 10 Pack - Bright and Versatile

In stock

Cameras

3DO 5050 RGBW SK6812 LED (10Pcs.)

Single LED: 5mm x 5mm / 0.2" x 0.2" May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color, and protocol.

Customers who bought this product also bought:

High-Quality AzureFilm ASA Black 1Kg for 3D Printing

High-Quality AzureFilm ASA Black 1Kg for 3D Printing 2

In stock

ASA

AzureFilm ASA Black 1Kg

Made in EU, high quality ASA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 240–260°C Heated bed: Recommended 100–120°C + Enclosure Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

3DO Enclosure / Nozzle Camera V2 FPC Cable

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 FPC Cable

FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

3DO Enclosure / Nozzle Camera V2 Sensor

3DO Enclosure / Nozzle Camera V2 Sensor 2

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 Sensor

Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range)...

Micro Omron SS-5GL Switch_840

Micro Omron SS-5GL Switch_840 2

In stock

Endstops / switches

Micro Omron SS-5GL Switch

Discover the Micro Omron SS-5GL Switch, a compact, high-performance switch designed for optimal efficiency and reliability. This versatile device is a perfect solution for a wide range of applications, offering superior performance with minimal footprint. Compact Design: Despite its small size, the Micro Omron SS-5GL Switch delivers big on performance,...

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

In stock

Other Accessories

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings. Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Asphalt Grey

Introducing the next generation of PLA - 3DO PLA 2.0 Tough Improved mechanical properties. The surface has been optimized to ensure exceptional printing quality with a matte finish. With 3DO PLA 2.0 Tough, you can achieve faster printing speeds compared to regular PLA. 3DO PLA (Made in EU) is manufactured from a biopolymer that is biodegradable...

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

3DO High Temperature USB Cable for Nozzle Camera (USB A to 5P) FEP+Silicone

High-quality USB cable for 3DO Nozzle Camera FEP Jacket with a silicone outer jacket 1 Data pair AWG28, 2 stranded power wires 28AWG Rated temeprature 200C Dynamic bending radius 24mm Static bending radius 16mm Includes 2x 5P 1.0 connectors 10x pins for connector

Customers who bought this product also bought:

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

Generic USB Cable for Nozzle Camera (USB A to 5P) - 2 Meters

Generic USB A to 5P JST SH for 3DO Nozzle Camera DSP PCB.

3DO Enclosure / Nozzle Camera V2 DSP PCB

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 DSP PCB

The heart of the 3DO Enclosure / Nozzle Camera V2 system.This DSP (Digital Signal Processor) takes the input from the 3DO camera and converts it into a standard USB UVC webcam signal. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

In stock

Other Accessories

Nevermore Boost (Scorch & Carbon Mix 50-50) 1.4Kg

Pre-prepared 50/50 mix of Nevermore Carbon and Nevermore Scorch; a less-hassle, best-of-both-worlds printer filtration Combining the long-life och stellar adsobtion capacity of activated carbon with Nevermore Scorch performance in hot surroundings. Ideal for most users with enclosed 3d printers printing ABS/ASA/PETG/PC in chamber temps of 50C +-10C.

High-Quality USB A to 5P Cable for 3DO Nozzle Camera

In stock

Cameras

3DO High Temperature USB Cable for Nozzle Camera (USB A to 5P) FEP+Silicone

High-quality USB cable for 3DO Nozzle Camera FEP Jacket with a silicone outer jacket 1 Data pair AWG28, 2 stranded power wires 28AWG Rated temeprature 200C Dynamic bending radius 24mm Static bending radius 16mm Includes 2x 5P 1.0 connectors 10x pins for connector

Micro Omron SS-5GL Switch_840

Micro Omron SS-5GL Switch_840 2

In stock

Endstops / switches

Micro Omron SS-5GL Switch

Discover the Micro Omron SS-5GL Switch, a compact, high-performance switch designed for optimal efficiency and reliability. This versatile device is a perfect solution for a wide range of applications, offering superior performance with minimal footprint. Compact Design: Despite its small size, the Micro Omron SS-5GL Switch delivers big on performance,...

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer

3DO ASA 1KG RatRig Green - UV-Resistant Copolymer 2

In stock

ASA

3DO ASA 1KG - RatRig Green

3DO ASA is a UV-resistant and weatherproof copolymer designed for industrial uses.It has a high level of process dependability and is well suited for mechanically stressed components. It's an electrically insulating substance.The layer adhesion, thermal stability, flow characteristics, and warping tendencies of 3DO ASA have all been optimized.The raw...

3DO Enclosure / Nozzle Camera V2 Sensor

3DO Enclosure / Nozzle Camera V2 Sensor 2

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 Sensor

Sensor and lens for 3DO Nozzle / Enclosure Camera V2. Choose between three options: Nozzle camera glued (lens glued to 3.45cm focus range from behind FPC) Nozzle camera not glued (lens not glued and can be adjusted to your desired focus range) Enclosure camera not glued, 120° FoV (lens not glued and can be adjusted to your desired focus range)...

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament

3DO PLA 2.0 Tough 1KG - Asphalt Grey: Enhanced 3D Printing Filament 2

In stock

PLA

3DO PLA 2.0 Tough 1KG - Asphalt Grey

Introducing the next generation of PLA - 3DO PLA 2.0 Tough Improved mechanical properties. The surface has been optimized to ensure exceptional printing quality with a matte finish. With 3DO PLA 2.0 Tough, you can achieve faster printing speeds compared to regular PLA. 3DO PLA (Made in EU) is manufactured from a biopolymer that is biodegradable...

High-Quality AzureFilm ASA Black 1Kg for 3D Printing

High-Quality AzureFilm ASA Black 1Kg for 3D Printing 2

In stock

ASA

AzureFilm ASA Black 1Kg

Made in EU, high quality ASA, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Printing Recommendations: Nozzle temperature: 240–260°C Heated bed: Recommended 100–120°C + Enclosure Print speed:50–100 mm/s Build platform: Glass bed, Kaptontape, Blue tape. Compatible with majority of FDM 3D printers.

3DO Enclosure / Nozzle Camera V2 FPC Cable

In stock

Cameras

3DO Enclosure / Nozzle Camera V2 FPC Cable

FPC (Flexible Printed Circuit), also referred to as the ribbon cable, connects the 3DO Camera sensor and 3DO Camera DSP. Choose between different lengths and options with or without LEDs. These cables provide the flexibility and lighting you need for optimal camera placement and performance. Github: https://github.com/3DO-EU/Enclosure-Nozzle-Camera-V2

Product added to wishlist

We use cookies to ensure that we give you the best experience on our website.
Read more in our cookie and privacy policy